136553 Euchner Safety Accessories

Product Details

• Series
  MGB-EI
• Product Class
  Accessories
• B10D
  0,13 x 10⁶
• Mission time
  20
• Diagnostic Coverage (DC)
  99
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Performance Level
  PL e
• Category
  4
• Switching element
  2 pos. driven NC
• Additional feature
  Incl. cover set ID. No. 120344
• Product version number
  V1.2
• Version
  Emergency stop illuminated
• Special features
  With adhesive ring
• Safety data protocol
  CIP Safety
• Assignment diagram
  B0
• Assured release distance Sar
  max.65 mm
• Bus data protocol
  Ethernet/IP
• Fusing
  min.1 A Slow blow
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Transponder coding
Unicode
Safety class
III
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Switching frequency
0,25 Hz
Connection
M12 Power, A-coded (X1)
Ambient temperature
-20 ... 55 °C
Shock and vibration resistance
In acc. with EN 60947-5-3
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Degree of protection
IP54
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Mechanical life
0,1 x 10⁶
Weight
3,1 kg
Installation orientation
Door hinge DIN right