136511 Euchner Safety Accessories

Product Details

• Weight
  8.3334636 lb
• Series
  MGB-EI
• Product Class
  Accessories
• Mission time
  20
• B10D
  0,13 x 10⁶
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Diagnostic Coverage (DC)
  99
• Performance Level
  PL e
• Product version number
  V1.2
• Category
  4
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Switching element
  2 pos. driven NC
• Special features
  With adhesive ring
• Assignment diagram
  B1
• Version
  Emergency stop illuminated
• Safety data protocol
  CIP Safety
• Bus data protocol
  Ethernet/IP
• Transponder coding
  Unicode
• Safety class
  III
• Degree of contamination (external, according to EN 60947-1)
  3
Assured release distance Sar
max.65 mm
Fusing
min.1 A Slow blow
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Rated insulation voltage Ui
75 V
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Connection
7/8" Power (X1)
Current consumption
max.500 mA
Guard locking principle
Open-circuit current principle
Locking force FZh
2000 N
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
3,1 kg
Degree of protection
IP54
Mechanical life
0,1 x 10⁶
Installation orientation
Door hinge DIN right
Switching frequency
0,25 Hz
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Ambient temperature
-20 ... 55 °C
Shock and vibration resistance
In acc. with EN 60947-5-3