136523 Euchner Safety Accessories

Product Details

• Series
  MGB-EI
• Product Class
  Accessories
• Mission time
  20 y
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  0,13 x 10⁶
• Diagnostic Coverage (DC)
  99
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Performance Level
  PL e
• Category
  4
• Product version number
  V1.2
• Additional feature
  Incl. cover set ID. No. 120344
• Special features
  With adhesive ring
• Switching element
  2 pos. driven NC
• Version
  Emergency stop illuminated
• Assignment diagram
  B1
• Bus data protocol
  Ethernet/IP
• Fusing
  min.1 A Slow blow
• Safety data protocol
  CIP Safety
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• Transponder coding
  Unicode
Assured release distance Sar
max.65 mm
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Safety class
III
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Degree of contamination (external, according to EN 60947-1)
3
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Locking force FZh
2000 N
Guard locking principle
Open-circuit current principle
Connection
7/8" Power (X1)
Switching frequency
0,25 Hz
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Mechanical life
0,1 x 10⁶
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Degree of protection
IP54
Installation orientation
Door hinge DIN left
Ambient temperature
-20 ... 55 °C
Weight
3,1 kg