136508 Euchner Safety Accessories

Product Details

• Weight
  8.1130016 lb
• Series
  MGB-EI
• Product Class
  Accessories
• Mission time
  20 y
• Diagnostic Coverage (DC)
  99
• PFHD
  3.05 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Product version number
  V1.2
• Category
  4
• Additional feature
  Incl. cover set ID. No. 120344
• B10D
  0,13 x 10⁶
• Performance Level
  PL e
• Switching element
  2 pos. driven NC
• Assignment diagram
  B1
• Bus data protocol
  Ethernet/IP
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Safety data protocol
  CIP Safety
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Transponder coding
  Unicode
Assured release distance Sar
max.65 mm
Safety class
III
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Fusing
min.1 A Slow blow
Degree of contamination (external, according to EN 60947-1)
3
Rated impulse withstand voltage Uimp
0,5 kV
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Current consumption
max.500 mA
Locking force FZh
2000 N
Connection
Plug connector RC12 (X14)
Rated insulation voltage Ui
75 V
Maximum feed-in current in the connection block
max.4000 mA
Guard locking principle
Open-circuit current principle
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Switching frequency
0,25 Hz
Weight
3,1 kg
Ambient temperature
-20 ... 55 °C
Reaction time
max.100 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Installation orientation
Door hinge DIN right
Shock and vibration resistance
In acc. with EN 60947-5-3
Mechanical life
0,1 x 10⁶
Degree of protection
IP54