109826 Euchner Safety Accessories

Product Details

• Weight
  7.4295694 lb
• Series
  Spare parts
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  0,13 x 10⁶
• Diagnostic Coverage (DC)
  99
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Performance Level
  PL e
• Category
  4
• Product version number
  V3.30.10
• Switching element
  2 pos. driven NC
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Assignment diagram
  B3
• Fusing
  min.1 A Slow blow
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Assured release distance Sar
  max.65 mm
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Transponder coding
Multicode
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Safety class
III
Connecting cable
Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
Rated impulse withstand voltage Uimp
0,5 kV
Maximum feed-in current in the connection block
max.4000 mA
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Guard locking principle
Open-circuit current principle
Locking force FZh
2000 N
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Switching frequency
0,25 Hz
Installation orientation
Door hinge DIN left
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Mechanical life
0,1 x 10⁶
Weight
3,1 kg
Degree of protection
IP54
Ambient temperature
-20 ... 55 °C
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Shock and vibration resistance
In acc. with EN 60947-5-3