109825 Euchner Safety Accessories

Product Details

• Weight
  7.75364854 lb
• Series
  MGB-PN (Profinet)
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  0,13 x 10⁶
• Diagnostic Coverage (DC)
  99
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Performance Level
  PL e
• Category
  4
• Product version number
  V3.30.10
• Switching element
  2 pos. driven NC
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Assignment diagram
  B3
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Assured release distance Sar
  max.65 mm
• Fusing
  min.1 A Slow blow
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Transponder coding
Multicode
Degree of contamination (external, according to EN 60947-1)
3
Safety class
III
Locking force FZh
2000 N
Connecting cable
Profinet I/O cable, at least cat. 5e
Current consumption
max.500 mA
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Rated insulation voltage Ui
75 V
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Guard locking principle
Open-circuit current principle
Installation orientation
Door hinge DIN right
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
3,1 kg
Mechanical life
0,1 x 10⁶
Switching frequency
0,25 Hz
Connection
Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Degree of protection
IP54
Ambient temperature
-20 ... 55 °C
Shock and vibration resistance
In acc. with EN 60947-5-3