088415 Euchner Limit Switches

Product Details

• Weight
  0.725445 lb
• Additional information
  (Switching elements with 5mm operating distance (16mm proximity switch spacing) are supplied with two different oscillator frequencies to avoid mutual interference. Multiple limit switches must therefore be assembled alternately with these switching eleme
• Switching hysteresis
  max.0,5 mm
• Assured operating distance Sa
  0 ... 4 mm (Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX..)
• Rated operating distance Sn
  5 mm
• LED indicator
  Yes
• Repeat accuracy R
  max.5 %
• Connection cross-section
  0,34 ... 1,5 mm² (Screw terminals)
• Voltage drop Ud
  max.2,5 V
• Off-state current Ir
  max.0,001 mA
• No-load current I0
  max.15 mA
• Type of output
  PNP
• Reverse polarity protection
  Yes
• EMC protection requirements
  EN IEC 60947-5-2
• Residual ripple
  max.10 %
• Rated insulation voltage Ui
  60 V
• Short circuit and overload protection, pulsed
  Yes
• Utilization category acc. to EN 60947-5-2
  DC-13 (The output is to be protected with a free-wheeling diode for inductive loads.)
• Rated operating current Ie
  250 mA
• Operating voltage
  10 ... 55 V
Number of switching elements
2
Connection
M20 x 1.5
Number of NC contacts/NO contacts
2
Switching frequency
max.500 Hz
Switching principle
NO + NC
Design
Upright
Weight
0,45 kg
Degree of protection
IP67
Ambient temperature
-25 ... 70 °C
Material
PBT
Proximity switch spacing
16 mm
Housing material
Die-cast aluminum