088414 Euchner Limit Switches

Product Details

• Weight
  1.1025 lb
• Switching hysteresis
  max.0,5 mm
• Assured operating distance Sa
  0 ... 4 mm (Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX..)
• Additional information
  (Switching elements with 5mm operating distance (16mm proximity switch spacing) are supplied with two different oscillator frequencies to avoid mutual interference. Multiple limit switches must therefore be assembled alternately with these switching eleme
• Rated operating distance Sn
  5 mm
• LED indicator
  Yes
• Repeat accuracy R
  max.5 %
• Connection cross-section
  0,34 ... 1,5 mm² (Screw terminals)
• Voltage drop Ud
  max.2,5 V
• No-load current I0
  max.15 mA
• Off-state current Ir
  max.0,001 mA
• EMC protection requirements
  EN IEC 60947-5-2
• Type of output
  PNP
• Residual ripple
  max.10 %
• Reverse polarity protection
  Yes
• Short circuit and overload protection, pulsed
  Yes
• Rated insulation voltage Ui
  60 V
• Utilization category acc. to EN 60947-5-2
  DC-13 (The output is to be protected with a free-wheeling diode for inductive loads.)
• Rated operating current Ie
  250 mA
• Operating voltage
  10 ... 55 V
Connection
M20 x 1.5
Number of switching elements
4
Number of NC contacts/NO contacts
4
Switching frequency
max.500 Hz
Switching principle
NO + NC
Weight
0,6 kg
Design
Upright
Degree of protection
IP67
Proximity switch spacing
16 mm
Housing material
Die-cast aluminum
Material
PBT
Ambient temperature
-25 ... 70 °C