250-112 WAGO Industrial Automation Components

WAGO 250-112 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring nominal and rated voltages of 160V in overvoltage category III/3 and pollution degree 3, and 320V in category II/2 with a rated surge voltage of 2.5kV. It has a rated current of 8A according to IEC/EN standards. Under UL 1059, it supports a rated voltage of 300V and a rated current of 5A for both Use Groups B and D, while CSA approvals indicate a rated voltage of 300V and a rated current of 10A for these groups. The part includes 12 connection points and potentials, with a single connection type and level utilizing Push-in CAGE CLAMP technology and push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), with specific sizes for ferruled conductors, and specifies a strip length of 8.5 to 9.5mm. The conductor connection direction to PCB is at 45 degrees, and the pole number is 12. Physical specifications include a pin spacing of 3.5mm, dimensions of 43.5mm in width, 16.7mm in height, 13.1mm height from the surface, and 12mm in depth, with solder pin length and dimensions provided. The terminal strip is designed for THT PCB contact with in-line solder pin arrangement and one solder pin per potential. It is made from Polyamide (PA66) in gray, meeting UL94 V0 flammability standards, with a copper alloy clamping spring and tin contact plating. The part weighs 5.6g, has a fire load of 0.126MJ, and operates within a temperature range of -60 to +105°C. It is RoHS compliant without exemptions, packaged in boxes of 100 units (25 SPU), and has a GTIN of 4044918647786 with a customs tariff number of 85369010000. The country of origin is CH.