158632 Euchner Safety Proximity Sensors

Product Details

• Weight
  1.763696 lb
• Series
  CES-AP
• Product Class
  Safety System
• Assured release distance Sar
  max.68 mm
• PFHD
  4.1 x 10⁻⁹
• Operating distance
  max.24 mm ALU
• Mission time
  20
• Category
  4
• Discrepancy time
  max.10 ms
• Repeat accuracy R
  ≤ 10
• Assured operating distance Sao
  max.10 mm ALU
• Performance Level
  PL e
• Test pulses
  max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Off-state current Ir
  max.0,25 mA
• Test-pulse interval
  min.140 ms
• Utilization category acc. to EN 60947-5-2
  24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Rated conditional short-circuit current
  100 A
• Output voltage
  0,8 x UB ... UB V DC
• Type of output
  Semiconductor output, p-switching, short circuit-proof
• Switching current
  max.50 mA
Safety class
III
Turn-on time
max.300 ms
Degree of contamination (external, according to EN 60947-1)
3
Rated insulation voltage Ui
300 V
Rated impulse withstand voltage Uimp
1,5 kV
Fusing
0,25 ... 8 A
Extension of risk time according to EN 60947-5-3 per device
max.260 ms
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5%, PELV
EMC protection requirements
In acc. with EN IEC 60947-5-3
Current consumption
max.35 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Connection
connection cable PUR, length 20m
Ready delay
10 s
Switching frequency
max.1 Hz
Mounting distance
min.80 mm
Installation orientation
Any
Tightening torque
2 Nm
Weight
0,7 kg
Degree of protection
IP65/IP67/IP69/IP69K
Static bending radius
5 x cable diameter
Ambient temperature
0 ... +65 °C
Mounting method
Surface mounting on metal
Shock and vibration resistance
In acc. with EN 60947-5-3
Dynamic bending radius
10 x cable diameter
Housing material
Two-component epoxy resin