156312 Euchner Safety Accessories

Product Details

• Weight
  1.929375 lb
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Performance Level
  PL e
• PFHD
  3.45 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Fusing
  min.1 A Slow blow
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Operating voltage DC
  24 V DC -15% ... +15% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• Auxiliary voltage DC
  24 V DC -15% ... +15% (The auxiliary voltage is not required for the MGB system)
• Connecting cable
  5-pin, M12x1
• Degree of contamination (external, according to EN 60947-1)
  3
• Safety class
  III
• Number of pins
  5
• EMC protection requirements
  EMC directive 2014/30/EU
• Maximum feed-in current in the connection block
  max.6000 mA
• Rated impulse withstand voltage Uimp
  1,5 kV
• Connection type
  Male plug
• Insertion cycles
  100
• Current consumption
  max.150 mA
Housing material
Fiber glass reinforced plastic, die-cast zinc, nickel plated
Rated insulation voltage Ui
75 V
Installation orientation
Any
Ambient temperature
-25 ... 55 °C
Connection
M12 D-coded, screened (XF2 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
Degree of protection
IP65 (Only in closed state with correctly mounted caps and the connecting cables or the connected modules)
Type specification
M12 EN 61076-2-101 / A-coded
Shock and vibration resistance
In acc. with EN 60947-5-3
Weight
0,85 kg