124594 Euchner Safety Proximity Sensors

Product Details

• Weight
  2.97182776 lb
• Series
  CET-AP
• Product Class
  Safety System
• PFHD
  3.1 x 10⁻⁹
• Repeat accuracy R
  10 %
• Mission time
  20 y
• Category
  4
• Switching delay from state change
  max.700 ms
• Turn-on time
  400 ms
• Performance Level
  PL e
• Discrepancy time
  max.10 ms
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures see operating instructions
• Risk time according to EN 60947-5-3
  max.400 ms
• Off-state current Ir
  max.0,25 mA
• Output voltage
  UB-1,5V ... UB V DC
• Safety class
  III
• Switching current
  1 ... 200 mA
• Switching load
  24V DC, class 2 (For alternatives see operating instructions)
• Type of output
  2 semiconductor outputs, p-switching, short circuit-proof
• Connecting cable
  30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
Degree of contamination (external, according to EN 60947-1)
3
Solenoid duty cycle
100 %
EMC protection requirements
In acc. with EN IEC 60947-5-3
Current consumption
80 mA
Connection rating
11 W
Fusing
0,25 ... 8 A
Utilization category acc. to EN 60947-5-2
24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Operating voltage DC
24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Guard locking principle
Closed-circuit current principle
Solenoid operating voltage DC
24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Locking force FZh
5000 N
Locking force Fmax
6500 N
Connection
2 plug connectors M12, 5-pin
Approach speed
max.20 m/min
Switching frequency
max.0,5 Hz
Ready delay
1 s
Mechanical life
1 x 10⁶
Housing material
Stainless steel
Degree of freedom Y
±5 mm
Weight
1 kg
Ambient temperature
-20 ... 55 °C
Installation orientation
Any (Preferably head downward)
Degree of protection
IP67 (Screwed tight plug connector/mating component)
Degree of freedom X
±5 mm
Degree of freedom Z
±4 mm
Shock and vibration resistance
In acc. with EN 60947-5-3