112048 Euchner Safety Locking Systems

Product Details

• Weight
  7.053795 lb
• Mission time
  20
• Diagnostic Coverage (DC)
  99
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• PFHD
  4.1 x 10⁻⁸
• Category
  4
• Performance Level
  PL e
• Switching element
  1NO
• B10D
  (According to manufacturer’s specifications)
• Product version number
  V3.30.10
• Color
  white
• Version
  Illuminated push buttons
• Assignment diagram
  C1
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Fusing
  min.1 A Slow blow
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Degree of contamination (external, according to EN 60947-1)
  3
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• Connecting cable
  Profinet I/O cable, at least cat. 5e
Safety class
III
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Ambient temperature
-20 ... 55 °C
Installation orientation
Any
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Switching frequency
0,25 Hz
Weight
2,7 kg
Degree of protection
IP54
Shock and vibration resistance
In acc. with EN 60947-5-3