105287 Euchner Safety Proximity Sensors

Product Details

• Weight
  5.0265336 lb
• Series
  MGB-PN (Profinet)
• Product Class
  Safety System
• Mission time
  20
• Diagnostic Coverage (DC)
  99
• PFHD
  4.1 x 10⁻⁸
• Category
  4
• Color
  Red
• Product version number
  V3.23.3
• Version
  Cover for indicators
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Assignment diagram
  B2
• Performance Level
  PL e
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Fusing
  min.1 A Slow blow
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Safety class
  III
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• Rated impulse withstand voltage Uimp
  0,5 kV
Connecting cable
Profinet I/O cable, at least cat. 5e
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Degree of contamination (external, according to EN 60947-1)
3
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Weight
1,8 kg
Degree of protection
IP54
Ambient temperature
-20 ... 55 °C
Switching frequency
0,25 Hz
Installation orientation
Any
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Shock and vibration resistance
In acc. with EN 60947-5-3
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Reaction time
max.220 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)