104509 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.20723428 lb
• Series
  CES-AP
• Product Class
  Safety System
• Switching hysteresis
  min.1 mm
• Mission time
  20
• Assured operating distance Sao
  min.10 mm
• Operating distance
  15 mm
• Assured release distance Sar
  max.60 mm
• Performance Level
  PL e
• PFHD
  1.8 x 10⁻⁹
• Repeat accuracy R
  ≤ 10
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Off-state current Ir
  max.0,25 mA
• Rated conditional short-circuit current
  100 A
• Test-pulse interval
  min.100 ms
• Discrepancy time
  max.10 ms
• Output voltage
  0,8 x UB ... UB V DC
• Test pulses
  max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
• Type of output
  p-switching, short circuit-proof
Switching current
max.50 mA
Risk time according to EN 60947-5-3
max.260 ms
Safety class
III
Turn-on time
max.300 ms
EMC protection requirements
In acc. with EN IEC 60947-5-3
Degree of contamination (external, according to EN 60947-1)
3
Fusing
0,25 ... 8 A
Rated impulse withstand voltage Uimp
1,5 kV
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5 %
Rated insulation voltage Ui
75 V
Current consumption
max.30 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Ready delay
0,5 s
Connection
Plug connector with latching connection, Ø8, 6-pin
Utilization category acc. to EN 60947-5-2
24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Switching frequency
max.1 Hz
Installation orientation
Any
Weight
0,04 kg
Tightening torque
max.1 Nm
Mounting method
Surface mounting on metal
Housing material
Plastic, PBT
Mounting distance
min.400 mm
Ambient temperature
-30 ... 65 °C
Degree of protection
IP67, IP69K
Shock and vibration resistance
In acc. with EN 60947-5-3