098225 Euchner Safety Accessories

Product Details

• Weight
  0.71870612 lb
• Series
  AR evaluation
• Product Class
  Safety System
• Mission time
  20 y (This value is dependent on the number of switching cycles and the switching current.)
• Performance Level
  PL e (This value is dependent on the number of switching cycles and the switching current.)
• Number of switching cycles
  max.720000 1/Jahr
• PFHD
  1.5 x 10⁻⁸ (This value is dependent on the number of switching cycles and the switching current.)
• Safety inputs
  2 (for CES-AR switch chain)
• Category
  4 (This value is dependent on the number of switching cycles and the switching current.)
• Utilization category acc. to EN 60947-5-1
  230 V 5 A
• Switching current
  1 ... 300 mA
• Discrepancy time
  max.25 ms
• Number of connectible safety switches
  max.12
• permissible resistance in feedback loop
  max.600 Ω
• Current via feedback loop
  5 ... 8 ... 10 mA
• Input voltage
  0 ... 2 V DC
• Input current
  5 ... 8 ... 10 mA
• Actuating duration
  min.250 ms
• Response delay
  300 ... 600 ms
• Output voltage
  0 ... 1 V DC
Output current
max.20 mA
Type of output
Semiconductor output, p-switching, short circuit-proof
Connection cross-section
0,14 ... 2,5 mm²
Switching delay from state change
max.480 ms (Corresponds to the risk time according to EN 60947-5-3. This is the maximum switch-off delay for the safety outputs following removal of the actuator.)
LED indicator
Green LED: Status of the device
Degree of contamination (external, according to EN 60947-1)
2
Rated impulse withstand voltage Uimp
4 kV
EMC protection requirements
In acc. with EN 60947-5-3
Fusing
2,5 ... 8 A
Rated insulation voltage Ui
250 V
Mechanical life
10 x 10⁶
Current consumption
1200 mA (Taking into account the load currents at the monitoring outputs (20 mA each))
Number of safety contacts
4 Relays with internally monitored contacts
Operating voltage DC
24 V DC -10% ... 10% Regulated, residual ripple < 5 %
Switching frequency
1 Hz (If the current load is > 100 mA, a switching frequency of 0.1 Hz should not be exceeded as this will affect the mechanical life of the relay contacts.)
Connection
Plug-in screw terminals coded
Number of monitoring outputs
12
Number of LED displays
3
Shock and vibration resistance
In acc. with EN 60947-5-3
Weight
0,25 kg
Mounting method
Mounting rail 35 mm according to EN 60715
Degree of protection
IP20
Atmospheric humidity
max.80 % rH
Ready delay
max.8 s (After the operating voltage is switched on, the relay outputs are switched off and the monitoring outputs are set LOW during the ready delay. For the visual indication of the delay, the green STATE LED flashes at a frequency of approx. 15 Hz.)
Ambient temperature
-20 ... 55 °C
Dimensions
114 x 99 x 45
Housing material
Plastic PA6.6