096673 Euchner Limit Switches

Product Details

• Weight
  1.5435 lb
• Additional information
  Mixed contact assembly (On upright multiple limit switches it is necessary to start with the safety station/s on the flange side. If several safety stations are to be fitted, these must be fitted directly one after the other.)
• B10D
  20 x 10⁶
• Switching current
  min.10 mA (Applies for station 1 with switching element ES508)
• Connection cross-section
  0,34 ... 1,5 mm²
• Rated impulse withstand voltage Uimp
  2,5 kV
• Rated insulation voltage Ui
  250 V
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Actuating force
  min.20 N
• Thermal rated current Ith
  8 A
• Short circuit protection according to IEC 60269-1
  8A gG
• Connection
  M20 x 1.5
• Approach speed
  0,01 ... 80 m/min
• Actuating element
  Roller plunger (Operating point accuracy ± 0.01. The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Number of NC contacts
  5
• Number of NO contacts
  5
• Number of switching elements
  6
• Number of positively driven contacts
  1
• Plunger spacing
  12 mm
• Contact material
  Silver alloy, gold flashed
Installation orientation
Any
Switching principle
Slow-action switching contact (Applies for station 1 with switching element ES508)
Degree of protection
IP67
Ambient temperature
-5 ... 80 °C
Housing material
Die-cast aluminum, anodized
Weight
0,65 kg
Mechanical life
30 x 10⁶
Design
Upright