090626 Euchner Limit Switches

Product Details

• Weight
  2.096955 lb
• Additional information
  Mixed contact assembly (On upright multiple limit switches it is necessary to start with the safety station/s on the flange side. If several safety stations are to be fitted, these must be fitted directly one after the other.)
• Connection cross-section
  0,34 ... 1,5 mm²
• Rated impulse withstand voltage Uimp
  2,5 kV
• Switching current
  min.5 mA (Applies for station 1-2 with switching element ES514)
• Short circuit protection according to IEC 60269-1
  6A gG (Applies for station 1-2 with switching element ES514)
• Utilization category acc. to EN 60947-5-1
  2.5A 230V (Applies for station 1-2 with switching element ES514)
• B10D
  2 x 10⁶
• Rated insulation voltage Ui
  250 V
• Thermal rated current Ith
  8 A
• Actuating force
  min.30 N
• Actuating element
  Roller plunger (Operating point accuracy ± 0.01. The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Approach speed
  0,01 ... 80 m/min
• Connection
  M25 x 1.5
• Number of switching elements
  5
• Number of NO contacts
  5
• Number of NC contacts
  3
• Number of positively driven contacts
  2
• Installation orientation
  Any
• Weight
  1,1 kg
Design
Upright, according to DIN 43697
Switching principle
Snap-action switching contact (Contact closing time < 4 ms contact bounce time < 3 ms, applies from station 3 with switching element ES502E)
Housing material
Sand-cast aluminum, anodized
Ambient temperature
-5 ... 80 °C
Plunger spacing
12 mm
Mechanical life
1 x 10⁶
Degree of protection
IP67
Contact material
Silver alloy, gold flashed