090525 Euchner Limit Switches

Product Details

• Weight
  1.18188 lb
• Additional information
  Mixed contact assembly (On upright multiple limit switches it is necessary to start with the safety station/s on the flange side. If several safety stations are to be fitted, these must be fitted directly one after the other.)
• B10D
  2 x 10⁶
• Connection cross-section
  0,34 ... 1,5 mm²
• Switching current
  min.5 mA (Applies for station 1-2 with switching element ES514)
• Rated impulse withstand voltage Uimp
  2,5 kV
• Short circuit protection according to IEC 60269-1
  6A gG (Applies for station 1-2 with switching element ES514)
• Rated insulation voltage Ui
  250 V
• Utilization category acc. to EN 60947-5-1
  6A 250V (Applies from station 3 with switching element ES502E)
• Thermal rated current Ith
  8 A
• Actuating force
  min.30 N
• Actuating element
  Chisel plunger (Operating point accuracy ± 0.002. The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Number of NO contacts
  4
• Connection
  M20 x 1.5
• Approach speed
  0,01 ... 40 m/min
• Number of positively driven contacts
  2
• Number of NC contacts
  2
• Number of switching elements
  4
• Installation orientation
  Any
• Ambient temperature
  -5 ... 80 °C
Plunger spacing
12 mm
Design
Upright
Contact material
Silver alloy, gold flashed
Switching principle
Snap-action switching contact (Contact closing time < 4 ms contact bounce time < 3 ms, applies from station 3 with switching element ES502E)
Mechanical life
1 x 10⁶
Housing material
Die-cast aluminum, anodized
Weight
0,5 kg
Degree of protection
IP67