089634 Euchner Limit Switches

Product Details

• Weight
  1.342845 lb
• Switching current
  min.10 mA
• Rated insulation voltage Ui
  50 V
• Additional information
  Housing without earth conductor! (All the electrical connections must either be isolated from the mains supply by a safety transformer according IEC 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.
• Short circuit protection according to IEC 60269-1
  8A gG
• Rated impulse withstand voltage Uimp
  1,5 kV
• Utilization category acc. to EN 60947-5-1
  6A 50V
• Operating point accuracy
  ± 0.002 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Approach speed
  0,01 ... 40 m/min
• Connection
  1 x plug connector M23 (Coninvers, UC-12P1N1280DU, 12-pin, with screened 3000mm cable. Mounted on right)
• Number of NO contacts
  2
• Number of NC contacts
  2
• Actuating force
  min.20 N
• Installation orientation
  Any
• Switching principle
  Snap-action switching contact
• Actuating element
  Chisel plunger
• Number of switching elements
  2
• Plunger spacing
  12 mm
• Degree of protection
  IP67 (Only screwed tight with the related mating connector)
• Weight
  0,5 kg
Housing material
Die-cast aluminum, anodized
Design
Upright
Contact closing time
< 4
Contact bounce time
< 3
Contact material
Silver alloy, gold flashed
Mechanical life
30 x 10⁶
Ambient temperature
-5 ... 80 °C