089526 Euchner Limit Switches

Product Details

• Weight
  1.148805 lb
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Connection cross-section
  0,34 ... 1,5 mm²
• B10D
  20 x 10⁶
• Additional information
  Mixed contact assembly (On upright multiple limit switches it is necessary to start with the safety station/s on the flange side. If several safety stations are to be fitted, these must be fitted directly one after the other.)
• Switching current
  (Applies for station 1-2)
• Rated impulse withstand voltage Uimp
  2,5 kV
• Rated insulation voltage Ui
  250 V
• Short circuit protection according to IEC 60269-1
  8A gG
• Operating point accuracy
  ± 0.002 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Thermal rated current Ith
  8 A
• Actuating element
  Chisel plunger
• Actuating force
  min.20 N
• Approach speed
  0,01 ... 40 m/min
• Number of switching elements
  5
• Number of NO contacts
  3
• Connection
  2 x M20 x 1.5
• Plunger spacing
  12 mm
• Number of positively driven contacts
  2
• Number of NC contacts
  3
Installation orientation
Any
Switching principle
Slow-action switching contact (Applies for station 1-2)
Contact material
Silver alloy, gold flashed
Contact bounce time
< 3ms (Applies from station 3)
Degree of protection
IP67
Contact closing time
< 4ms (Applies from station 3)
Weight
0,6 kg
Ambient temperature
-5 ... 80 °C
Mechanical life
30 x 10⁶
Housing material
Die-cast aluminum, anodized
Design
Upright