088571 Euchner Limit Switches

Product Details

• Weight
  1.488375 lb
• Switching hysteresis
  max.0,2 mm
• Additional information
  (Switching elements with 5mm operating distance (16mm proximity switch spacing) are supplied with two different oscillator frequencies to avoid mutual interference. Multiple limit switches must therefore be assembled alternately with these switching eleme
• Rated operating distance Sn
  2 mm
• Assured operating distance Sa
  0 ... 1,6 mm (Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX..)
• LED indicator
  Yes
• Repeat accuracy R
  max.5 %
• Connection cross-section
  0,34 ... 1,5 mm² (Screw terminals)
• Voltage drop Ud
  max.2,5 V
• Off-state current Ir
  max.0,001 mA
• No-load current I0
  max.15 mA
• EMC protection requirements
  EN IEC 60947-5-2
• Type of output
  PNP
• Reverse polarity protection
  Yes
• Rated insulation voltage Ui
  60 V
• Residual ripple
  max.10 %
• Short circuit and overload protection, pulsed
  Yes
• Utilization category acc. to EN 60947-5-2
  DC-13 (The output is to be protected with a free-wheeling diode for inductive loads.)
• Rated operating current Ie
  250 mA
• Operating voltage
  10 ... 55 V
Connection
M25 x 1.5
Number of NC contacts/NO contacts
2
Number of switching elements
2
Weight
1,4 kg
Ambient temperature
-25 ... 70 °C
Switching frequency
max.500 Hz
Material
PBT
Switching principle
NO + NC
Housing material
Sand-cast aluminum
Degree of protection
IP67
Proximity switch spacing
16 mm
Design
Horizontal