087619 Euchner Electronic Components

Product Details

• B10D
  2 x 10⁶
• Switching current
  min.5 mA (Applies for station 1-2 with switching element ES514)
• Connection cross-section
  0,34 ... 1,5 mm²
• Additional information
  Mixed contact assembly (On upright multiple limit switches it is necessary to start with the safety station/s on the flange side. If several safety stations are to be fitted, these must be fitted directly one after the other.)
• Rated impulse withstand voltage Uimp
  2,5 kV
• Rated insulation voltage Ui
  250 V
• Short circuit protection according to IEC 60269-1
  6A gG (Applies to station 1-2 with switching element ES514. 8A gG applies to stations 3 and 4 with switching element ES502E.)
• Thermal rated current Ith
  6 A (Applies to station 1-2 with switching element ES514. 8A applies to stations 3 and 4 with switching element ES502E.)
• Approach speed
  0,01 ... 40 m/min
• Utilization category acc. to EN 60947-5-1
  2.5A 230V (Applies for station 1-2 with switching element ES514)
• Actuating element
  Chisel plunger (Operating point accuracy ± 0.002. The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Connection
  M25 x 1.5
• Actuating force
  min.30 N
• Number of NO contacts
  4
• Number of NC contacts
  2
• Switching principle
  Snap-action switching contact (Contact closing time ≤ 5 ms, contact bounce time ≤ 3 ms, applies for station 1-2 with switching element ES514)
• Number of positively driven contacts
  2
• Contact material
  Silver alloy, gold flashed
• Weight
  0,9 kg
• Ambient temperature
  -5 ... 80 °C
Degree of protection
IP67
Design
Upright
Plunger spacing
12 mm
Housing material
Die-cast aluminum, anodized
Mechanical life
1 x 10⁶
Number of switching elements
4
Installation orientation
Any