071900 Euchner Safety Accessories

Product Details

• Weight
  0.4851 lb
• Read distance
  7 ... 12 ... 20 mm (It is necessary to maintain the minimum distance on the approach of the data carrier from the side if the data must be transferred correctly to the read head in one transmission.)
• Center offset
  -11 ... 11 mm
• Approach speed
  max.12 m/min (Reduction for each additional hexadecimal digit (at sL = 12 mm and mL = 0 mm) 1.5 m/min)
• Input voltage
  min.15 V DC SKIP input HIGH level
• Output voltage
  min.Ub - 3 V DC For HIGH level
• Resistance
  4,5 kΩ Input resistance
• Data interface
  4 bit binary coded + strobe
• Switching current
  -30 ... +30 mA Per output
• Operating voltage DC
  20 ... 28 V DC (All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC/EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)
• Type of output
  Push-Pull
• Connection
  M12 plug, 8-pin, axial connection (The screen on the connection cable is connected to the read head's housing via the knurled nut on the M12 plug connector.)
• Current consumption
  110 ... 150 mA Without load
• Ambient temperature
  0 ... 50 °C
• Mounting method
  Surface
• Degree of protection
  IP67
• Housing material
  CuZn, nickel-plated