MM305I Enerpac Portable Machine Tools

Product Details

• Function
  ID Mount Flange Facing Machines
• Hydraulic Option Available
  On request
• Shipping Weight (lbs)
  133
• Weight (excluding Base) (lbs)
  36
• Maximum Base Assembly Weight (lbs)
  18
• Facing Feed Rate, 1.25 mm pitch feed screw (supplied), Fine Finish (in/rev)
  0.006
• Tool Post Travel (in)
  1.6
• Grooves per Inch, 1.75 mm pitch feed screw (supplied), Coarse Finish
  32
• 4 Jaw Base Clamping Range (in)
  4.7 - 12
• Minimum Swing Diameter (in)
  15.4
• Grooves per Inch, 1.25 mm pitch feed screw (supplied), Fine Finish
  179
• Facing Feed Rate, 1.25 mm pitch feed screw (supplied), Coarse Finish (in/rev)
  0.022
• Grooves per Inch, 1.75 mm pitch feed screw (supplied), Fine Finish
  128
• Grooves per Inch, 1.0 mm pitch feed screw (optional), Fine Finish
  224
• Facing Feed Rate, 1.0 mm pitch feed screw (optional), Coarse Finish (in/rev)
  0.018
• Facing Feed Rate, 1.75 mm pitch feed screw (supplied), Coarse Finish (in/rev)
  0.031
• Facing Feed Rate, 1.75 mm pitch feed screw (supplied), Fine Finish (in/rev)
  0.008
• Grooves per Inch, 1.25 mm pitch feed screw (supplied), Coarse Finish
  45
• Grooves per Inch, 1.0 mm pitch feed screw (optional), Coarse Finish
  56
• RPM (max)
  80
Facing Feed Rate, 1.0 mm pitch feed screw (optional), Fine Finish (in/rev)
0.004
Air Supply Needed @ 90 psi (scfm)
50
Maximum Facing Diameter (in)
12
Output Pneumatic (hp)
1.1
Number of Feed Settings (standard)
2
Standard Drive Type
Air
Minimum Facing Diameter (in)
2