745-3810 WAGO Industrial Automation Components

WAGO 745-3810 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 320V for overvoltage category III/3 and pollution degree 3, and 630V for category II/2, with a rated impulse voltage of 4kV across these categories. The rated current is 32A according to IEC/EN standards. Under UL 1059 approvals, it has rated voltages of 300V and rated currents of 20A for Use Group B and 10A for Use Group D. CSA approvals mirror these ratings for both Use Group B and D. This part has a single connection point, with one potential and connection type across one level, utilizing CAGE CLAMP technology for the connection, which requires an operating tool. It accepts solid and fine-stranded conductors ranging from 0.08 to 4mm2 (28 to 12 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 2.5mm2, with a strip length of 8 to 9mm. The conductor connection direction to the PCB is at 45 degrees, with a pole number of 1. Physically, it has a pin spacing of 5mm, a width of 6.5mm, a height of 23mm, with 19mm height from the surface, and a depth of 19.4mm. The solder pin length is 4mm, with dimensions of 0.8 x 1.2mm, and a drilled hole diameter with tolerance of 1.5 (+0.1)mm. It does not allow plugging without loss of pin spacing, features THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is pink, made from Polyamide (PA66) with a flammability class of V0, chrome-nickel spring steel for the clamping spring, electrolytic copper with tin plating for contacts, and has a fire load of 0.025MJ, weighing 1.7g. It operates within a temperature range of -60 to +105°C. Packaged in boxes, with 200 pieces per unit (50 per SPU), it is manufactured in Poland, has a GTIN of 4055143893602, a customs tariff number of 85369010000, and is RoHS compliant without exemptions.