745-3105 WAGO Industrial Automation Components

WAGO 745-3105 is an automation part with a short circuit breaking rating and electrical data adhering to IEC/EN 60664-1 standards, including a nominal voltage of 320V for overvoltage category III/3 and II/2 with respective rated impulse voltages of 4kV. It supports a rated current of 32A. Under UL 1059 standards, it has a rated voltage of 300V and rated currents of 20A for Use Group B and 10A for Use Group D. CSA approvals mirror these ratings for both Use Groups B and D. This part features 5 connection points, a single connection type with CAGE CLAMP technology, and supports solid and fine-stranded conductors ranging from 0.08 to 4mm2 (28 to 12 AWG), including those with insulated or uninsulated ferrules. The strip length for connections is 8 to 9mm, with a conductor connection direction to PCB at 45 degrees and a pole number of 5. Physically, it has a pin spacing of 5mm, dimensions of 26.5mm in width, 23mm in height, 19mm height from the surface, and 19.4mm in depth, with solder pin length of 4mm and dimensions of 0.8 x 1.2mm. The drilled hole diameter with tolerance is 1.5 (+0.1)mm. It does not support plugging without loss of pin spacing, features THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of V0, and uses Chrome-Nickel spring steel and Electrolytic Copper with tin plating for its contacts. It weighs 9.2g, has a fire load of 0.14MJ, and operates within a temperature range of -60 to +105°C. It is RoHS compliant without exemption, packaged in boxes of 120 pieces, and has a GTIN of 4045454153700 with a customs tariff number of 85369010000, originating from Poland.