2624-1105 WAGO Industrial Automation Components

WAGO 2624-1105 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It has a nominal voltage of 320V (III/3), 400V (III/2), and 630V (II/2) with a rated impulse voltage of 4kV for all categories. The rated current is 41A according to IEC/EN standards. Under UL 1059, it has a rated voltage of 300V and rated currents of 26A for Use Group B and 10A for Use Group D. CSA approvals indicate a rated voltage of 300V and rated currents of 26A for Use Group B and 5A for Use Group D. It features 5 connection points, a single connection type, and one level, utilizing Push-in CAGE CLAMP technology for connection, suitable for solid and fine-stranded conductors ranging from 0.2 to 6mm2 (24 to 10 AWG), with various ferrule types supported. The strip length for connection is between 10 to 12mm, and the conductor connection direction to PCB is 0°. It has a pole number of 5, pin spacing of 5mm, dimensions of 26.5mm in width, 19.4mm in height, 15.4mm height from the surface, and 16.3mm in depth. The solder pin length is 4mm, with dimensions of 0.8 x 1mm, and a drilled hole diameter with tolerance of 1.3 (+0.1)mm. It is designed for feed-through mounting with THT PCB contact, in-line solder pin arrangement, and two solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring, with electrolytic copper (ECu) contacts plated with tin. It weighs 7.9g and operates within a temperature range of -60 to +105°C. It is RoHS compliant without exemptions, packaged in boxes of 100 pieces, and has a GTIN of 4055143578332 with a customs tariff number of 85369010000. The country of origin is DE.