250-105 WAGO Industrial Automation Components

WAGO 250-105 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 160V in overvoltage category III/2 and 320V in category II/2, with a rated impulse voltage of 2.5kV for both categories. The rated current is 8A according to IEC/EN standards. Under UL 1059, it has a rated voltage of 300V and a rated current of 5A for both Use Groups B and D, while CSA approvals indicate a rated voltage of 300V and a rated current of 10A for these groups. The connector has 5 connection points, supports a single connection type with one level, and utilizes Push-in CAGE CLAMP technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 1mm2. The strip length for connection is between 8.5 and 9.5mm, with a conductor connection direction to PCB at 45 degrees and a pole number of 5. Physically, it has a pin spacing of 3.5mm, dimensions of 19mm in width, 16.7mm in height, 13.1mm height from the surface, and 12mm in depth, with solder pin length of 3.4mm and dimensions of 0.4 x 0.75mm. The drilled hole diameter with tolerance is 1.1 (+0.1)mm. It features a THT PCB contact with in-line solder pin arrangement and one solder pin per potential. The connector is gray, made from Polyamide (PA66) in material group I, with a flammability class of V0 per UL94, and uses a copper alloy for the clamping spring and tin for contact plating. It has a fire load of 0.056MJ and weighs 2.5g. It operates within a temperature range of -60 to +105°C. The product belongs to Product Group 4 (Printed Circuit Connectors), is RoHS compliant without exemption, and comes in a box packaging of 240 pieces per unit (60 pieces per subunit). The country of origin is CH, with a GTIN of 4044918647205 and a customs tariff number of 85369010000.