236-403/000-009/999-950 WAGO Industrial Automation Components

WAGO 236-403/000-009/999-950 is a printed circuit connector with a short circuit breaking rating as per ATEX PTB 06 ATEX 1061 U / IECEx PTB 06.0042 U, rated voltage EN (Ex e II) of 176V, and a rated current (Ex e II) of 16A. It features 3 connection points, with a total of 3 potentials and 1 connection type across 1 level. The connector employs CAGE CLAMP technology for connection 1, requiring an operating tool for actuation. It accommodates solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 (28 to 12 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 1.5mm2. Notably, it supports 12 AWG THHN; THWN conductors with a strip length of 5 to 6mm (0.2 to 0.24 inches) and a conductor connection direction to PCB at 45 degrees. The pole number for connection 1 is 3. Physically, it has a pin spacing of 5/5.08mm (0.197/0.2 inches), a width of 17.3mm (0.681 inches), a height of 17mm (0.669 inches), and a depth of 14mm (0.551 inches), with a height from the surface of 13mm (0.512 inches). The solder pin length is 4mm, with dimensions of 0.7 x 0.7mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. It features a THT PCB contact with solder pins arranged over the entire terminal strip (in-line) and two solder pins per potential. The connector is light gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It has a fire load of 0.043MJ and weighs 2.8g. Designed to operate within a temperature range of -60 to +105°C, it complies with RoHS without exemptions. The product is part of the Printed Circuit Connectors group, packaged in boxes of 280 (70) pieces, originates from CH, and has a GTIN of 4044918776806 with a customs tariff number of 85369010000.